PhoXi 3D scanners family

From 3D scanning Knowledge base - Photoneo wiki
Revision as of 10:23, 24 August 2016 by Admin (talk | contribs) (Created page with "== Installation == 1. Mount the scanner, connect it to the power source and ethernet. 2. Run the installer packed in the archive and follow the on-screen instructions 3. Run...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installation

1. Mount the scanner, connect it to the power source and ethernet. 2. Run the installer packed in the archive and follow the on-screen instructions 3. Run PhoXiControl.exe under Program Files/Photoneo/PhoXi Scan/bin