Difference between revisions of "PhoXi 3D scanners family"

From 3D scanning Knowledge base - Photoneo wiki
Jump to: navigation, search
(Connectivity)
(Connectivity)
Line 62: Line 62:
 
== Connectivity ==
 
== Connectivity ==
 
[[File:Connectivity v1.png|800x600px]]
 
[[File:Connectivity v1.png|800x600px]]
 
Status LEDs on the back side, matching the arrangement shown below.
 
  
 
{| class="wikitable"
 
{| class="wikitable"
! ⚫ Power status
+
! colspan="2" | Status LEDs on back side matching the arrangement shown below
 +
|-
 +
| ⚫ Power status
 
Power cable connected
 
Power cable connected
! ⚫ Processing unit connected
+
| ⚫ Processing unit connected
 
On => Suitable power connected
 
On => Suitable power connected
 
Off => Under/overvoltage, overcurrent
 
Off => Under/overvoltage, overcurrent

Revision as of 14:42, 19 July 2018

This page contains technical description of PhoXi 3D Scanners. For scanning guide, see Scanning best practices.

General specification

Projection unit
Light source Visible red light (laser)
Wavelength 638nm
Laser class 3R (IEC / EN 60825-1, 2014)
Peak / CW Power 314uW
Pulse Energy 382nJ
Pulse Length 960us
Projection angle horizontal 47.5° ±1°
Projection angle vertical 36.0° ±2°

For model/size specific parameters see our product showcase.

Specification Parameters Explanation

Depth Map resolution
Maximum number of measured points (the resolution of camera sensor)
Point size
The distance between two measured points on the plane perpendicular to the camera in the focus distance from the camera.
Relation of point size to scanning distance
Absolute accuracy
The accuracy of point measurement as the result of device calibration (can be understood as the space deformation). It is the standard deviation of the measurement error in the whole measuring range of the device.
Z noise
The standard deviation of the noise (measured on a diffuse surface with 80 percent albedo). The noise level describes the quality of the sensor to capture local surface details. The noise distribution of our sensor is similar to Gaussian distribution. Can be understood as temporal noise.
FPS
Maximum number of triggered frames per second, in fastest acquisition mode
Data acquisition time - best case
Fastest possible acquisition time
Data acquisition time - worst case
Longest expected acquisition time (bad lighting conditions, dark shiny objects)
3D points throughput
Number of 3D points that can be reconstructed in a second in sequential scans

Connectivity

Connectivity v1.png

Status LEDs on back side matching the arrangement shown below
⚫ Power status

Power cable connected

⚫ Processing unit connected

On => Suitable power connected Off => Under/overvoltage, overcurrent

⚫ Reserved

-

⚫ Reserved

-

⚫ Ethernet speed

Off => Indicates 1 Gbps On => Indicates 100 Mbps

⚫ Ethernet activity

Off => Link is down Flashing Green => Link is up, with activity Steady Green => Link is up, no activity

CAD data

Contains 3D Scanner body and its scanning volume as a solid object.

Available CAD models for download:

Device Mounting space coordinate space Camera coordinate space
PhoXi 3D Scanner XS XS - mounting space XS - camera space
PhoXi 3D Scanner S S - mounting space S - camera space
PhoXi 3D Scanner M - mounting space M - camera space
PhoXi 3D Scanner L L - mounting space L - camera space
PhoXi 3D Scanner XL XL - mounting space XL - camera space
All in mounting space All in camera space

Note: Camera coordinate space is only approximate.

ScanningVolume.png

Mounting plate drawing

MountingPlateDrawing.png