Locator Tutorial: Setting up Locator to work with SIASUN robots
It is highly recommended that users read Locator Tutorial: Introduction prior to installation of specific robot interface
1. Prerequisities
Locator SIASUN Interface is compatible with following system version: UI: 2.0.5, Robot: 1.0.5 or higher.
Check your robot system version before proceeding further, on Main Menu Click About Tab:
If your pendant is still in Chinese, select Settings tab and Switch language to English at the bottom of the page:
2. SIASUN Controller setup
The following tutorial gives a step by step guide of how to configure your SIASUN robot controller and install all the necessary files you will need to get the robot interface for Locator up and running.
This tutorial was originally written using the latest collaborative SCR5 with system version UI: 2.0.5, Robot: 1.0.5
2.1 Network Configuration
The Locator SIASUN Module utilizes TCP/IP communication for transferring data between SIASUN Robot Controller and Vision Controller.
As a first step in commissioning, ensure that the IP address of the SIASUN controller meets your network configuration requirements
Browse to Settings -> IP Address, select Static option and configure network settings of robot controller:
Confirm new network configuration by clicking on YES button:
The new network configuration is applied immediately, reboot is not necessary.