Locator Tutorial: Setting up Locator to work with ABB robots

From 3D scanning Knowledge base - Photoneo wiki
Revision as of 11:21, 11 April 2018 by Durovsky (talk | contribs)

Jump to: navigation, search

1. Prerequisities

Photoneo ABB Interface is compatible with RobotWareOS versions 5.13 and higher.

In addition to compatible system version, the following conditions must also be met:

- (616-6) PC Interface Module available

Go to System Info -> System Properties -> Control Module -> Options to check if these options are available within your system:

Locator prerequisities.png


Locator ABB tutorial step1.PNG


Locator ABB tutorial step2.PNG


Locator ABB tutorial step3.PNG


Locator ABB tutorial step4.PNG


Locator ABB tutorial step5.PNG


Locator ABB tutorial step6.PNG


Locator ABB tutorial step7.PNG


Locator ABB tutorial step8.PNG


Locator ABB tutorial step9.PNG


Locator ABB tutorial step10.PNG


Locator ABB tutorial step11.PNG


Locator ABB tutorial step12.PNG


Locator ABB tutorial step13.PNG


Locator ABB tutorial step14.PNG


Locator ABB tutorial step15.PNG


Locator ABB tutorial step16.PNG


Locator ABB tutorial step17.PNG


Locator ABB tutorial step18.PNG

Retrieved from "http://wiki.photoneo.com/index.php?title=Locator_Tutorial:_Setting_up_Locator_to_work_with_ABB_robots&oldid=531"